Comprehensive Services

Comprehensive services in these industries in both aesthetic and protective applications including inspections, maintenance, planning, implementation & failure remediation.

CLEANING/ SURFACE PREPaRATION

  • Hand tool, power tool cleaning
  • Abrasive blasting (dry/wet)
  • Sodium blasting
  • Dry ice blasting
  • Solvent cleaning
  • Acid etching
  • Degreasing
  • Water/detergent cleaning
  • Power washing/water jetting
  • Mold remediation
  • Ultra high pressure water jetting/ hydro blasting 10k-40k psi
  • Chemical cleaning/stripping
  • Steam cleaning
  • Blastrac-shot blasting
  • Vacuum/HEPA
  • Wall paper/covering removal
  • Drywall finishing
  • Abatement
  • & more....

COATINGS & WALLCOVERINGS

  • General & commercial painting
  • Industrial painting
  • High performance coatings
  • Corrosion resistant coatings
  • Chemical resistant coatings
  • Impact resistant coatings
  • Immersion coatings
  • UV resistant coatings
  • Intumescent fireproofing
  • High temperature coatings
  • Floor coatings
  • Specialty primers
  • Skid resistant coatings
  • Anti-static coatings
  • Pool & aquatic linings and coatings
  • Glass reinforced coatings
  • Anti-graffiti coatings
  • Concrete coatings
  • Concrete sealing and staining
  • Textured spray systems
  • Tank linings
  • Polyurea
  • Wallcovering: paper, vinyl, fabric, flexible wood, acoustical wall systems, murals, foils, dry erase
  • Sealers, stains both concrete and wood finishes
  • LEED approved products
  • Liquid air barrier systems
  • Lead encapulization
  • and more….

CAULKING/SEALANTS AND WATERPROOFING

  • General caulking
  • Expansion and control joints
  • Waterproofing, above and below grade walls, masonry walls
  • Fluid applied waterproofing for traffic and pedestrian
  • Plural component waterproofing (MMA)

DECORATIVE FINISHES

  • Faux finishing
  • Duro-plex
  • Gold/silver leaf and other metallic finishes
  • Venetian and sgraffito plaster
  • Marble/wood graining
  • Concrete staining
  • Zolatone and other multi-colored systems
  • & more...

ACCESS/CONTAINMENT SYSTEMS and DECONTAMINATION UNITS

  • General containment
  • Spider staging/rigging/scaffolding
  • Dehumidification/ventilation
  • Positive/negative air
  • Supplied air systems
  • Mobile decontamination units

ASSET PROTECTION THROUGH PROTECTIVE COATING EVALUATION & PLANNING FOR MAINTENANCE PAINTING

THOMARIOS offers a full service inspection, specifying, and coating applications for your plant or facility. As you know all facilities must be maintained. THOMARIOS can protect your valuable assets and reduce your costs over the long term. Our NACE and SSPC Certified coating inspectors and Protective Coating Specialists will review the current condition of your plant or facilities integral, structures and other building elements. They will decipher what coating has been used, it’s adhesion rates, what type of surface preparation that will be required to recoat, and most importantly of all, what products will last longest and be best for your intended use and budget. Since governmental laws and regulations have changed products in the marketplace, THOMARIOS has been abreast of all new technologies offered by coating manufacturers including LEED and “Green” products. These technologies could save money on your bottom line by extending the overall coatings life expectancy.

THOMARIOS maintenance painting plans can be budgeted, implemented and can even carry an extended manufacturer product and labor warranty, so that you will have little to worry about. THOMARIOS will account for all possible safety and environmental issues. If containment and disposal of hazardous waste is needed, accountability, documentation and testing will be carried out. All these steps will reduce your possible liability by providing systematic solutions. With THOMARIOS' stellar safety record and highly trained workforce, your facility can be completed safely and on time.

COATING INSPECTION, FAILURE ANALYSIS & REMEDIATION

Are you currently having a problem with the coatings inside or outside your facility? Are they failing prematurely?

THOMARIOS employs highly educated, trained, and certified coating inspectors from NACE (National Association of Corrosion Engineers) and the SSPC (the Society of Protective Coatings). We can measure many things, one of which is checking coating thicknesses to see whether or not coatings were applied to a proper specification and determine a possible cause of a shortened coating life. We can also use third party testing agencies to review samples to determine and trace back or reaffirm a potential cause of the premature failure. Our employees can then remediate the problem with various forms of surface preparation, utilizing proper product implementation and or new technologies to lengthen and protect the life of your asset.

THOMARIOS Is A Licensed Applicator For The Following Products

  • A-D fireproofing
  • Albi-Clad fireproofing
  • Armex
  • Cafco
  • Duro-Plex
  • Edison restoration coatings
  • Faux effects products
  • Firefilm ii
  • Isolatek International
  • Litex
  • Liquid-Plastics Inc.
  • Madewell
  • Nullfire
  • Pyrocrete fireproofing
  • Scuffmaster
  • Sika
  • Soprema
  • Stirling Loyd products
  • Stonehard
  • Triarch
  • Tennant Floor coatings
  • Tex-Cte coatings
  • Tk products
  • & more...

 

 

Featured Photos

Akron

One Canal Square Plaza
Suite #1501
Akron, OH 44308
330-670-9900 (p)
330-670-9993 (f)
info@thomarios.com

View Map
Copley

Plant & Operational Facility
1122 Jacoby Road
Copley, OH 44321
330-670-9900 (p)
info@thomarios.com

View Map
Pittsburgh

121 Wabash Street
Pittsburgh, PA 15220
412-444-0353 (p)
414-444-0357(f)
info@thomarios.com

View Map
Back to Top